Door Sweep

Pest Proofingdoor sealEco-Friendly

Weather-stripping device installed on the bottom of doors to seal the gap between door and threshold, preventing pest entry, drafts, and moisture.

Typical Cost
$10-30 per door
Shelf Life
5-10 years depending on traffic and exposure
Where to Buy
Hardware stores, home improvement centers, online retailers

Common Use Cases

  • Seal gaps under exterior entry doors
  • Block pest entry under interior doors
  • Weatherproof garage doors
  • Seal compactor room doors
  • Close gaps under utility room doors

Application Instructions

Measure door width and cut sweep to size with hacksaw. Choose type: adhesive-backed (easiest), screw-mount (most durable), or slide-on (no tools needed but less secure). For screw-mount: position sweep so seal makes contact with threshold when door is closed. Mark holes, pre-drill if needed, attach with screws. Adjust height so sweep seals gap but door opens freely. Test for light gaps under closed door.

Specifications

Types: brush sweep (uneven surfaces), rubber blade (smooth surfaces), dual-seal (maximum protection). Mounting: adhesive, screw-on, or slide-on track. Materials: aluminum, stainless steel, or vinyl mounting with nylon brush, rubber, or vinyl seal. Lengths typically 36" or custom cut.

Safety Warnings & Precautions

  • Ensure door can still open freely for emergency egress
  • Do not create trip hazard with improper installation
Important Disclaimer: The information provided in this knowledge base is for educational and reference purposes only. Pest management professionals should always consult current product labels, Safety Data Sheets (SDS), manufacturer instructions, and applicable local, state, and federal regulations as the definitive source of truth. Product formulations, application methods, safety requirements, and regulations may change over time. This information may be out of date and should not replace professional judgment, proper training, or required licensing and certifications.